Видео

Story of my life, gotta work on something before I can use it

Spraying it with the paint you purchased would have given you better results.

MKe it look good by: 1) iron your canvas on 2) sand down once dry to clear up seams. 3) 25% water not 50 4) sand between EVERY coat of paint. 5) don’t listen to chrisgriffith because his art work doesn’t go flying down the highway at 60-70mph (80 here in Texas) 6) either way, nice freaking work on this man!

❤❤❤❤ looking very nice 👍👍👍👍👍👍

What wire is for the window to go down?

The Ford fit perfectly in the town where you bought the Pizza... Looked like a very nice, well-kept old town. Where was that?

Saya suka lihat nya bukan d i kerjain mlaj batnyak omong terus

Take it back to 1930 as much as possible it's much cooler that way

I think you forgot one step an that is you have to bleed master cilinder

Worry about welding and grinding near the gas tank , otherwise a good repair.Happy motoring

Love how it's all original that's one thing I want is to have one all original with the mohair seats and everything

Paul Shinn channel is a great channel with loads of info on the Model A. Those ar such fun cars I myself is thinking about getting one I would really love a 1932 ford but those things are so expensive and hard to find a good one because many were used as Hot Rods and still are today but the modal A is really cool.

Nice job!

It looks awesome, you did terrific on fiberglass and paint

Wrap those pipes with some aluminum foil, then make a small canal and the oil will flow right into that oil pan

Interesting video. I've been noodling on the idea of buying a Model A. I live in the California desert. While I don't need (or want) to drive on our scorcher days, but to know that a mechanically sound car will be fine on our normally warm days is comforting. Thanks so much. you might invest in a radiator guard to protect that pretty new Brassworks improvement.

Enjoying the Journey with your Fury. It’s a Great watch and learning a lot. That’s what’s it all about with these cherished Mopars. Im looking forward to the future content. Cheers from a fellow Fury II owner.

Does the roughness of the exterior capture dirt more than a smooth, less "porous" (rough) surface?

Since you have a Model A Ford, I believe it would be worth it to join the Model A Ford Club of America.

Running on the Stromberg 97 is an oldschool way of hot rodding in the day. What you have is a 4 banger hot rod. You didn't say whether or not the head is a high compression head or not. My 4 banger uses a Stromberg 81 and I have had great performance with it. It is an original 81 and I have read that it is preferred for the 4 cylinder over the 97. Of course the Zenith carb would be a good choice to go back to.

Use a screw on door knob bumper on the door aligned with the contact point. They make stainless steel and you can paint escutcheon black to match.

Drill new holes on the window for drains and fill the wrong holes with LEXEL. If the functions don’t damage camper trying to “ fix it”!

Same issue with VW valve covers… dry cork and a bale to compress the seal… upgrades include covers with two bolts.😅

Use a micro fiber roller and Rustoleum above the waterline paint as the top coat… results in a very smooth finish.

Great, I watch this every year!

are you fix the problem?

Head gasket ,a lot of seepage !!!!!

👍

You get used to double clutching, I would not change the gearbox, it becomes second nature. Give it time.

Put a flathead in it but not this heavy mercedes diesel boat anchor

You don't sound very enthusiastic for a young man with such a beautiful bike

I have a 2014 Buick Lacrosse and I am having a hard time finding a door wire harness tried eBay. The dealership has discontinued it any suggestions is anything similar to it?

Where do find the connectors

من فکر میکنم با توجه به ظرافتی که بخرج دادی وزحمتی که کشیدی ۳۵۰۰ دلار قیمت کمی بود امیدوارم ادامه بدی وکار رو تکملتر کنی وبه قیمت بالاتر بفروشی من مجاب شدم که از کار شما کپی کنم وصاحب یک مینی کمپر شوم 🌹👍

Put a diesel in a model A , you should be arrested

So Novi Scored a bit of p..... never mind.

I’m really enjoying watching your videos. I love your 1.5” PVC hose flushing setup. We are working on my dad’s car that’s been sitting for 40 years and going to install the same radiator this weekend. I’m going to use your flushing technique before we do- I think dad will be impressed! Thanks again!

When you put that hub cap back on, I have a 1930 Model A take the wheel off put the hub cap on and on the inside of the wheel bend those tabs over that are sticking through. the hub cap will never fall off again.

Good job replacing that head gasket. Liking your sedan and the 1931 SW Cabriolet Convertible.

I need to replace drivers door harness on my 2006 sienna but can't get to first base. ALL the wires were cut and somebody pulled them out to inside of the car. Only place I see on inside of car to pass the harness is a 1/2 by 1" slot in the car frame. Seems too small to pass connectors through! Help!😅😅

When shifting down ....clutch pull out of gear release clutch rev up engine clutch again shift to 2nd and release clutch and throttle up

This is brilliant, you come over as an enthusiast like me not an expert which means you are having fun learning all the time about your car , Adrian ( 1935 Morris 10 owner in England)

loved the video reminded me of taking my good lady for a first drive in a 1935 Morris 10 ( in England) Morris is much like the Ford but smaller. Still have the Morris ( and my good lady) 35 years later. Adrian

great build. impressive. what type of glue did you use for the fibergalss covering? standard type wood glue?

after 15 mins enough of that whinning glottis choking strangulated voice, ffs learn to speak properly stop choking your glottis and whinning through your nose and breathing irratically.

Funny enough you can use old bedsheets for this instead of canvas Because it's thinner it allows the glue to get better bonding Because my dad did that with his And he also put 2 layers of wire mesh for windows Every few layers Of the bed sheets, also he watered down his glue to let it impregnate the fabric Better. When building the camper in his truck And it's what I plan on doing And I know it's not the poor man's fiberglass anymore After I put a layer of epoxy resin on the outside Just for that extra strength And I plan on doing the same thing for inside on any frame Parts Because I mean in the end it's just really fancy paper mache

Good to see young people getting involved with the old cars. Old cars are a journey and they create a bond. Never sell or you will be sorry.

I would restore the car to original including the carb and distributer and anything else. Work on getting the body which in itself will be a project. Join a Model A club, you probably will come into contact with parts you will probably need.

Bro your car looks like a sports sedan 🎉

You can hitxrod the Model A engine. Lits if parts available for that!